|
|
|
|
|
Brickform Lythic Day 1 RTU 1gal
|
|
Day1 is a finishing aid that lubricates the surface for faster, easier finishing. Day1 can also extend workable time by 15 to 30 minutes, even under adverse conditions such as high wind, heat, or low humidity. Day1 eliminates the need to add water to the surface which can be detrimental to the surface performance of the slab. It can also be used to help finish shake on hardeners in low bleedwater environments. Day1 is a safety net, giving finishers more time on the slab.
|
|
|
|
|
|
|
|
Dayton Superior J-74 Aquafilm Concentrate 1gal
|
|
1gal Bottle
|
|
|
|
|
|
|
|
Brickform Surface Deactivator 1gal
|
|
Surface Deactivator makes exposed aggregate finishes easier and more consistent. It is topically applied to freshly-placed concrete to prevent cement paste hardening and achieve more controlled exposed aggregate finishes. Unlike sugar-based retarders, Surface Deactivator selectively halts the hydration process down to a controlled depth, allowing a more certain level of retardation. Ten predetermined color-coded exposure depths are available to provide consistent, repeatable cement paste removal and aggregate reveal. Surface Deactivator provides a longer window before the surface paste must be removed, allowing underlying concrete to harden properly, locking in aggregate, and reducing pop-outs. Surface Deactivator is water-soluble for easy removal with high pressure water washing and scrubbing equipment.
Surface Deactivator creates a polymeric film that acts as a water retention barrier and temporary curing agent, protecting fresh concrete from light rain and reducing moisture loss.
Surface Deactivator can be applied to newly-placed concrete that is specified for diamond polishing. It softens surface cement paste, reducing heavy grinding stages up to 75% and dramatically decreasing polishing time as well as diamond-tooling and labor costs.
|
|
|
|
|
|
|
|
Hudson 2 1/2 Gallon Curing Compound Sprayer
|
|
- Sprays up to 35% solids
- Endurall® epoxy-coated inside and out
- Ribbed Tank adds strength and protects against dents and dings
- Separate opening allows filling without removing pump
- Continental ConiTech® Frontier® extreme chemical resistant hose
- Brass Thrustless™ control valve – lasts longer, shuts off quickly
- Strong bendable curved brass 24” extra large aperture spray wand
- 2-nozzles, 110-10E and 8004E
- 1 year warranty
|
|
|
|
|
|
|
|
Brickform Lythic Day 1 RTU 5gal
|
|
Day1 is a finishing aid that lubricates the surface for faster, easier finishing. Day1 can also extend workable time by 15 to 30 minutes, even under adverse conditions such as high wind, heat, or low humidity. Day1 eliminates the need to add water to the surface which can be detrimental to the surface performance of the slab. It can also be used to help finish shake on hardeners in low bleedwater environments. Day1 is a safety net, giving finishers more time on the slab.
|
|
|
|
|
|
|
|
Hudson 3 1/2 Gallon Curing Compound Sprayer
|
|
- Sprays up to 35% solids
- Endurall® epoxy-coated inside and out
- Ribbed Tank adds strength and protects against dents and dings
- Separate opening allows filling without removing pump
- Continental ConiTech® Frontier® extreme chemical resistant hose
- Brass Thrustless™ control valve – lasts longer, shuts off quickly
- Strong bendable curved brass 24” extra large aperture spray wand
- 2-nozzles, 110-10E and 8004E
- 1 year warranty
|
|
|
|
|
|
|
|
Dayton Superior J-74 Aquafilm Concentrate 5gal
|
|
5gal Bucket
|
|
|
|
|
|
|
|
Brickform Lythic Day 1 Concentrate 1gal
|
|
Day1 is a finishing aid that lubricates the surface for faster, easier finishing. Day1 can also extend workable time by 15 to 30 minutes, even under adverse conditions such as high wind, heat, or low humidity. Day1 eliminates the need to add water to the surface which can be detrimental to the surface performance of the slab. It can also be used to help finish shake on hardeners in low bleedwater environments. Day1 is a safety net, giving finishers more time on the slab.
|
|
|
|
|
|
|
|
Brickform Surface Deactivator 5gal
|
|
Surface Deactivator makes exposed aggregate finishes easier and more consistent. It is topically applied to freshly-placed concrete to prevent cement paste hardening and achieve more controlled exposed aggregate finishes. Unlike sugar-based retarders, Surface Deactivator selectively halts the hydration process down to a controlled depth, allowing a more certain level of retardation. Ten predetermined color-coded exposure depths are available to provide consistent, repeatable cement paste removal and aggregate reveal. Surface Deactivator provides a longer window before the surface paste must be removed, allowing underlying concrete to harden properly, locking in aggregate, and reducing pop-outs. Surface Deactivator is water-soluble for easy removal with high pressure water washing and scrubbing equipment.
Surface Deactivator creates a polymeric film that acts as a water retention barrier and temporary curing agent, protecting fresh concrete from light rain and reducing moisture loss.
Surface Deactivator can be applied to newly-placed concrete that is specified for diamond polishing. It softens surface cement paste, reducing heavy grinding stages up to 75% and dramatically decreasing polishing time as well as diamond-tooling and labor costs.
|
|
|
|
|
|
|
|
Brickform Lythic Day 1 Concentrate 5gal
|
|
Day1 is a finishing aid that lubricates the surface for faster, easier finishing. Day1 can also extend workable time by 15 to 30 minutes, even under adverse conditions such as high wind, heat, or low humidity. Day1 eliminates the need to add water to the surface which can be detrimental to the surface performance of the slab. It can also be used to help finish shake on hardeners in low bleedwater environments. Day1 is a safety net, giving finishers more time on the slab.
|
|
|