Home > Solomon Colors
Sort By:
Page of 1
Solomon Colors UltraFiber 500 (1.5#)
Solomon Colors UltraFiber 500 (1.5#)
Our Price: $4.62


Solomon UltraFiber 500 is an alkaline resistant cellulose
fiber reinforcement for Commercial and Residential Slabs, Composite Metal
Decks, Paving, Pervious Paving, Curb and Gutter, Slip Form, Architectural and
Decorative, Shotcrete, Wall, and White Topping applications.  UltraFiber 500 provides excellent secondary
reinforcement, is safe and easy to use, and provides superior finishability. It
can replace traditional secondary reinforcement while improving durability, impact
resistance, shatter resistance, and freeze/thaw resistance. Bonding between
rebar and cement paste is improved while concrete permeability and absorption
is reduced. Unlike Polypropylene fiber, UltraFiber 500 is invisible in
concrete, does not ball, fuzz, or blemish. It yields an aesthetically perfect
finish with no special finishing practices. Also, unlike Polypropylene fiber,
UltraFiber 500 is derived from renewable resources.






UltraFiber 500 has superb finishing quality, unsurpassed
crack control, better hydration and bonding, is great for decorative and
colored concrete, and utilizes an automated dispensing system.

more info
Solomon Colors ColorFlo Liquid Color 5 Sack Mix (1 yd)
Solomon Colors ColorFlo Liquid Color 5 Sack Mix (1 yd)
Our Price: $17.00

ColorFlo® liquid pigments provide consistent color between batches. Solomon Colors liquid pigments offer a cost effective means of safely and efficiently adding color to block, retaining wall, and paver production. For over 30 years, ColorFlo® liquid pigments have produced uniform and consistent color for concrete products. Our liquid color has the highest solids in the industry.

*DISCLAIMER* The colors may not exactly represent the final color. Shade variations of cement and aggregate plus variations in the volume of water, the addition of admixtures and other additives may have an effect on the design mix and final color.
more info
Solomon Colors ColorFlo Liquid Color 5-1/2 Sack Mix (1 yd)
Solomon Colors ColorFlo Liquid Color 5-1/2 Sack Mix (1 yd)
Our Price: $19.00

ColorFlo® liquid pigments provide consistent color between batches. Solomon Colors liquid pigments offer a cost effective means of safely and efficiently adding color to block, retaining wall, and paver production. For over 30 years, ColorFlo® liquid pigments have produced uniform and consistent color for concrete products. Our liquid color has the highest solids in the industry.

*DISCLAIMER* The colors may not exactly represent the final color. Shade variations of cement and aggregate plus variations in the volume of water, the addition of admixtures and other additives may have an effect on the design mix and final color.
more info
Solomon Colors ColorFlo Liquid Color 6 Sack Mix (1 yd)
Solomon Colors ColorFlo Liquid Color 6 Sack Mix (1 yd)
Our Price: $22.50

ColorFlo® liquid pigments provide consistent color between batches. Solomon Colors liquid pigments offer a cost effective means of safely and efficiently adding color to block, retaining wall, and paver production. For over 30 years, ColorFlo® liquid pigments have produced uniform and consistent color for concrete products. Our liquid color has the highest solids in the industry.

*DISCLAIMER* The colors may not exactly represent the final color. Shade variations of cement and aggregate plus variations in the volume of water, the addition of admixtures and other additives may have an effect on the design mix and final color.
more info
Solomon Colors UltraFiber 302 Blend (16.5#)
Solomon Colors UltraFiber 302 Blend (16.5#)
Our Price: $25.50


Advantages of UltraFiber 302 Fiber Blend: ACI 302 recognizes
the benefits of using a natural cellulose micro fiber and steel fiber blend to
reduce early age plastic shrinkage and provide long term crack control.
Additionally, this fiber blend improves the tensile strength/capacity of the
concrete. The UltraFiber 302 Blend can replace traditional continuous steel for
temperature and shrinkage reinforcement. UltraFiber 500® is the fiber of choice
for decorative concrete and a proven performer reducing plastic drying
shrinkage in residential, light commercial, overlays and structurally
reinforced concrete. CFS 150-5 steel fibers have long been a solution for
longer term concrete crack control and added tensile capacity in the same
applications. Combining these two fibers creates “peace of mind” in overlays
and traditional 4” to 6” building slabs and pavement designs within ACI joint
guidelines.  

more info
Brickform Surface Deactivator 1gal
Brickform Surface Deactivator 1gal
Our Price: $49.88


Surface Deactivator
makes exposed aggregate finishes easier and more consistent.  It is topically applied to freshly-placed
concrete to prevent cement paste hardening and achieve more controlled exposed
aggregate finishes.  Unlike sugar-based
retarders, Surface Deactivator selectively halts the hydration process down to
a controlled depth, allowing a more certain level of retardation. Ten
predetermined color-coded exposure depths are available to provide consistent,
repeatable cement paste removal and aggregate reveal. Surface Deactivator
provides a longer window before the surface paste must be removed, allowing
underlying concrete to harden properly, locking in aggregate, and reducing
pop-outs.  Surface Deactivator is
water-soluble for easy removal with high pressure water washing and scrubbing
equipment.



Surface Deactivator
creates a polymeric film that acts as a water retention barrier and temporary
curing agent, protecting fresh concrete from light rain and reducing moisture
loss.



Surface Deactivator
can be applied to newly-placed concrete that is specified for diamond
polishing. It softens surface cement paste, reducing heavy grinding stages up
to 75% and dramatically decreasing polishing time as well as diamond-tooling
and labor costs.

more info
Brickform Surface Deactivator 5gal
Brickform Surface Deactivator 5gal
Our Price: $201.34


Surface Deactivator
makes exposed aggregate finishes easier and more consistent.  It is topically applied to freshly-placed
concrete to prevent cement paste hardening and achieve more controlled exposed
aggregate finishes.  Unlike sugar-based
retarders, Surface Deactivator selectively halts the hydration process down to
a controlled depth, allowing a more certain level of retardation. Ten
predetermined color-coded exposure depths are available to provide consistent,
repeatable cement paste removal and aggregate reveal. Surface Deactivator
provides a longer window before the surface paste must be removed, allowing
underlying concrete to harden properly, locking in aggregate, and reducing
pop-outs.  Surface Deactivator is
water-soluble for easy removal with high pressure water washing and scrubbing
equipment.



Surface Deactivator
creates a polymeric film that acts as a water retention barrier and temporary
curing agent, protecting fresh concrete from light rain and reducing moisture
loss.



Surface Deactivator
can be applied to newly-placed concrete that is specified for diamond
polishing. It softens surface cement paste, reducing heavy grinding stages up
to 75% and dramatically decreasing polishing time as well as diamond-tooling
and labor costs.

more info