Home > Concrete Accessories & Equipment > Form Stakes
Sort By:
Page of 1
Landre Accuscreed Nut
Landre Accuscreed Nut
Our Price: $0.45

INCREASE SPEED & EFFICIENCY | One person can set several locations in the same time it takes to set screed using other methods of screed setting. In any type of subgrade, our systems set in seconds, not minutes.
IMPROVE ACCURACY | Our systems are the inexpensive solutions to the SUPERFLAT requirements of today’s market. Our systems produce results which surpass the ASTM standard of 1/8” deviation in 10ft become the norm instead of the exception.
GIVES A BETTER FINISH | Because our products allow a faster and much flatter lay down, you will achieve better finishes without pockets caused by stake removal or high spots common from wet screeding. EXAMPLE: A 2,600 sq. ft. floor was poured using AccuScreed© with a total deviation of the pour at 3/64”.
TESTED & PROVEN | This patented device has been developed and proven by a concrete contractor with more than 30 years of successful concrete finishing experience. Our systems pay for themselves after just one use and improve your bottom line.

Landre Megascreed Yoke
Landre Megascreed Yoke
Our Price: $1.15

INCREASE SPEED & EFFICIENCY | One person can set several locations in the same time it takes to set screed using other methods of screed setting. In any type of subgrade, our systems set in seconds, not minutes.
IMPROVE ACCURACY | Our systems are the inexpensive solutions to the SUPERFLAT requirements of today’s market. Our systems produce results which surpass the ASTM standard of 1/8” deviation in 10ft become the norm instead of the exception.
GIVES A BETTER FINISH | Because our products allow a faster and much flatter lay down, you will achieve better finishes without pockets caused by stake removal or high spots common from wet screeding. EXAMPLE: A 2,600 sq. ft. floor was poured using AccuScreed© with a total deviation of the pour at 3/64”.
TESTED & PROVEN | This patented device has been developed and proven by a concrete contractor with more than 30 years of successful concrete finishing experience. Our systems pay for themselves after just one use and improve your bottom line.

Landre Accuscreed Yoke
Landre Accuscreed Yoke
Our Price: $1.35

INCREASE SPEED & EFFICIENCY | One person can set several locations in the same time it takes to set screed using other methods of screed setting. In any type of subgrade, our systems set in seconds, not minutes.
IMPROVE ACCURACY | Our systems are the inexpensive solutions to the SUPERFLAT requirements of today’s market. Our systems produce results which surpass the ASTM standard of 1/8” deviation in 10ft become the norm instead of the exception.
GIVES A BETTER FINISH | Because our products allow a faster and much flatter lay down, you will achieve better finishes without pockets caused by stake removal or high spots common from wet screeding. EXAMPLE: A 2,600 sq. ft. floor was poured using AccuScreed© with a total deviation of the pour at 3/64”.
TESTED & PROVEN | This patented device has been developed and proven by a concrete contractor with more than 30 years of successful concrete finishing experience. Our systems pay for themselves after just one use and improve your bottom line.

Dee 3/4" x 18" Metal Stake (10/box)
Dee 3/4" x 18" Metal Stake (10/box)
Our Price: $43.20

3/4" Round Metal Stake with holes
Dee 3/4" x 24" Metal Stake (10/box)
Dee 3/4" x 24" Metal Stake (10/box)
Our Price: $55.90

Cold Rolled 3/4" Round Metal Stake with holes
Dee 3/4" x 30" Metal Stake (10/box)
Dee 3/4" x 30" Metal Stake (10/box)
Our Price: $69.42

Cold Rolled 3/4" Round Metal Stake with holes
Landre Megascreed Driver
Landre Megascreed Driver
Our Price: $76.95

INCREASE SPEED & EFFICIENCY | One person can set several locations in the same time it takes to set screed using other methods of screed setting. In any type of subgrade, our systems set in seconds, not minutes.
IMPROVE ACCURACY | Our systems are the inexpensive solutions to the SUPERFLAT requirements of today’s market. Our systems produce results which surpass the ASTM standard of 1/8” deviation in 10ft become the norm instead of the exception.
GIVES A BETTER FINISH | Because our products allow a faster and much flatter lay down, you will achieve better finishes without pockets caused by stake removal or high spots common from wet screeding. EXAMPLE: A 2,600 sq. ft. floor was poured using AccuScreed© with a total deviation of the pour at 3/64”.
TESTED & PROVEN | This patented device has been developed and proven by a concrete contractor with more than 30 years of successful concrete finishing experience. Our systems pay for themselves after just one use and improve your bottom line.

Dee 3/4" x 36" Metal Stake (10/box)
Dee 3/4" x 36" Metal Stake (10/box)
Our Price: $83.46

Cold Rolled 3/4" Round Metal Stake with holes
Landre Accuscreed Driver
Landre Accuscreed Driver
Our Price: $90.45

INCREASE SPEED & EFFICIENCY | One person can set several locations in the same time it takes to set screed using other methods of screed setting. In any type of subgrade, our systems set in seconds, not minutes.
IMPROVE ACCURACY | Our systems are the inexpensive solutions to the SUPERFLAT requirements of today’s market. Our systems produce results which surpass the ASTM standard of 1/8” deviation in 10ft become the norm instead of the exception.
GIVES A BETTER FINISH | Because our products allow a faster and much flatter lay down, you will achieve better finishes without pockets caused by stake removal or high spots common from wet screeding. EXAMPLE: A 2,600 sq. ft. floor was poured using AccuScreed© with a total deviation of the pour at 3/64”.
TESTED & PROVEN | This patented device has been developed and proven by a concrete contractor with more than 30 years of successful concrete finishing experience. Our systems pay for themselves after just one use and improve your bottom line.

Dee 3/4" x 12" Metal Stake (25/box)
Dee 3/4" x 12" Metal Stake (25/box)
Our Price: $93.00

Cold Rolled 3/4" Round Metal Stake with holes